Coating Thickness Gauge

Product Details:

Ultrasonic Thickness Gauge UTM10

Application
* This unit is an intelligent handheld product, which adopts ultrasonic measuring principle, and is controlled by micro processor, provides quick and precise measurement of thickness for most of industrial material. This unit is widely used in various precise measurement for different hardware /parts in industrial realm; one of its important application is to monitor the level of thickness-decreasing during operation of various and pressure container. Diffusely applied in manufacture fields, metal processing, and commercial inspection.

SPECIFICATION

• Measuring range 1.00 to 300.0mm(steel)
• Accuracy+-(1%H+0.1mm)
• H denotes the measured thickness
• Working frequency 5MHz
• Resolution0.01mm(1.00 to 99.99mm)
• 0.1mm(100 to 300mm)
• Minimum limit for tube measuring steel
• 15*2.0mm( 6mm transducer)
• 20*3.0mm(10mm transducer)
• Sound velocity range1000 to 9999m/s
• Thickness25mm, accuracy of velocity+-1.25mm/Hx100%
• Thickness25mm, accuracy of velocity +-5%
• Operating environment
• Operation temperature 0 to 40
• Relative Humidity <90%
• Do not apply in violent vibration / erosive material
• Avoid impact and humidity
• Power supply1.5V AAA * 3 PCS
• Weight223g
• Size 72*29*146mm

Request
Callback

Additional Information:

• Item Code: UTM10
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Coating Thickness Meter CM-8821

We offer our clients coating thickness gauge for Ferrus & non metals only, which are in compliance with the industry standards. These gauges are majorly used in furniture making as these are efficient in holding two wooden parts strongly together. Further, our gauge can be availed in bulk quantities as we maintain huge stocks. For our clients, we can deliver quality products within the shortest span of time.

APPLICATION: Used for Measuring Thickness of Non Magnetic Materials (Paint, Plastic, Porcelain Enamel, Copper, Zinc, Aluminium, Chrome etc.) on Magnetic Material (Iron, Nickle )

 

SPECIFICATION:

• Display: 4 Digit Display (10mm LCD)
• Measuring Range: 0-1000um (0-40mil)
• Accuracy: ±1-3%n or ±2.5um(Whichever is Greater)
• Resolution: 1µm(0-99.9µm), 1µm(over100µm)
• Operating Principle: Magnetic Induction (F)
• Measuring Area: 10.7mm
• Operating Temperature & Humidity: 0°C to 50°C,≤80%RH
• Calibration: Self Calibration
• Auto Power Off
• Battery Indicator: Low Battery Indication
• Power Supply: 4×1.5V AA Size Battery
• Buttons: 5 Buttons
• Display Size: 41×23mm
• Weight: 260gm including batteries
• Dimension: 161x69x32 mm (6.3×2.7×1.2 inch)
• Accessories: Operational Manual, Probe, Calibration Foil, Carrying case, Substrate block.

Request
Callback

Additional Information:

• Item Code: CM-8821

Product Details:

Coating Thickness Gauge

FUNCTION :

• CM-8825F (FERROUS SUBSTRATE)
• CM-8825N (NON FERROUS SUBSTRATE)
• CM-8825FNF (2 IN 1, F & NF Type)
• Measuring Principle : Magnetic Induction & Eddy Current
• Measurement Range : 0~200um / 500um / 1000um / 2000um In Built Probe (Integrated Probe)
• Resolution : 0.1um (Under 100um) 1um (Over 100um)
• Accuracy : ±1~3%N or ±3um
• Probe Type Recognition : Manual (For Cm-8825FN)
• Measurement Mode : Single Data Output : Rs232c Interface (Optional)
• Power Supply : 4x1.5v Aaa(Um-4) Battery 2 Shutdown
• Models : Manual / Automatic
• Dimension : 131 X 65 X 28mm

Application :
(1) CM-8825F can measure the thickness of non-magnetic coating layers (aluminum, chrome, copper,
ename1, rubber, paint) on magnetic substrate (steel, iron, alloy and magnetic stainless steel)
(2) CM-8825N can measure the thickness of non-conductive coating layers (ename1, rubber, paint, vanish,
plastic anodic oxide layer) covered on non-ferrous substrate (aluminum, brass, zinc, tin and
non-magnetic stainless steel)

Request
Callback

Additional Information:

• Item Code: CM-8825FN

Product Details:

Coating Thickness Meter CM-8823
We offer our clients coating thickness gauge for Ferrus & non metals only, which are in compliance with the industry standards. These gauges are majorly used in furniture making as these are efficient in holding two wooden parts strongly together. Further, our gauge can be availed in bulk quantities as we maintain huge stocks. For our clients, we can deliver quality products within the shortest span of time.

APPLICATION:

Used for Measuring Thickness of Non Magnetic Coating (Anodizing, Varnish Paint, Enamel Plastic Coating, Powder etc.) on Non Magnetic Materials.

SPECIFICATION:

• Display: 4 Digit Display (10mm LCD)
• Measuring Range: 0-1000um (0-40mil)
• Accuracy: ±1-3% or ±2.5um (Whichever is the Greater )
• Resolution: 1µm(0-99.9µm), 1 µm(over 100µm)
• Operating Principle: Non Magnetic Induction (NF)
• Measuring area: 10.7mm
• Operating Temperature & Humidity: 0⁰C to 50⁰C,≤80%RH
• Calibration: Self Calibration
• Auto Power Off
• Battery Indicator: Low Battery Indicator
• Power supply: 5V AA Size Batteries
• Buttons: 5 Buttons
• Display Size: 41 X 23 mm
• Weight : 260g Including Batteries
• Dimension: 161x69x32 mm(6.3×2.7×1.2 inch)
• Accessories: Carrying Case, Operational Manual, NF probe, Calibration Foil, Aluminum Substrate

Request
Callback

Additional Information:

• Item Code: CM-8823